Program tool and parts

Tools & Bits

The Perfect Raceway Program Tool V2 is the current program tool. The standard kit includes the tool, one custom 58-inch bit, laser, target, bracket, and case. Extra bits, a tool-only kit, a laser kit, V2 bushings, and a rebuild kit are listed below.

Prices are in U.S. dollars, taken from the public product listings as of November 9, 2026. Inventory is not shown on this draft. Each Buy button opens a Stripe checkout for that item and quantity.

Shipping note. Flat-rate USPS shipping to the lower 48 states: $150 for the standard V2 kit (tool and bit), $40 for the tool without a bit, $105 for up to five 58-inch bits, and $20 for the laser kit, bushings, or rebuild kit. The $105 bit rate covers up to five bits; for six or more bits, or other multi-unit orders not covered by a quantity button, contact sales@perfectraceway.com or (775) 241-8730. Please inspect a bit shipment before you sign for it; if the package is damaged, refuse it so a claim can be started.
Perfect Raceway Program Tool V2 with laser and custom bit, standing on a foam block.

SKU: PRPTV2

Perfect Raceway Program Tool V2

$749 each, qty 1–4

QuantityPrice eachOrder
1–4 $749.00 Buy now
5–9 $674.41 Buy now
10+ $599.20 Buy now

New and improved Perfect Raceway Tool / Dor-Cor drilling fixture. The standard order includes one drill bit, one laser, one laser target, one laser bracket, and one case, and ships in two packages. The laser is included at no additional cost.

From the product data sheet: the V2 tool weighs 1.5 lb (the earlier tool was 5.5 lb) and has a smaller profile — about one-third the size of the old Dor-Cor. It is made from a specially formulated polymer compound. It has nine parts, not counting the case. Bushings pop out and in with no disassembly. A second set of bushings for 1/4-inch ID (for a future 1/4-inch pilot bit) is included. The tool works with existing custom bits, so owners of the earlier tool do not have to buy new bits unless they want a spare.

Locking slides attach the tool to the door in under 3 seconds, with up to 80 lb of holding force. The tool can be placed in any position on the back of the door. Tightening the slide locks does not alter the straightness of the tool on the door. Replacement parts can be ordered separately; no tools are needed to take it apart or repair it.

The data sheet describes the locking slides as patent pending, and states the tool is Perfect Raceway Program approved. A PDF data sheet is available for download.

Download the V2 data sheet (PDF, 74 KB)

Open carrying case with foam cutouts holding the Perfect Raceway Program Tool V2, without the long drill bit.

SKU: TODO — not listed on the source product page

PRPV2 — Less DCDB

$587 each, qty 1

QuantityPrice eachOrder
1 $587.00 Buy now
2 $557.00 Buy now
3+ $529.75 Buy now

Version 2.0 Perfect Raceway Tool without the custom drill bit. If you already have a serviceable custom bit from an earlier tool, this kit is backward-compatible with that bit. It includes the custom case, laser, laser guide, and laser target. It does not include a drill bit.

Because the custom bit is expensive to ship, ordering the tool without the bit reduces shipping cost significantly. If you need the full package with the custom bit, choose the standard V2 kit above.

Close-up of the custom Dor-Cor drill bit tip, showing the flutes and the through-hole used for pulling wire.

SKU: DCDB

Dor-Cor Drill Bit

$162 each, qty 1

QuantityPrice eachOrder
1 $162.00 Buy now
2–5 $153.90 Buy now
6+ Contact sales@perfectraceway.com or (775) 241-8730

Replacement custom bit for the Dor-Cor / Perfect Raceway drilling fixture. Made from steel rod stock with a welded high-speed steel (HSS) tip. The tip has a through-hole so you can attach a wire and pull it through the door. Total length is 58 inches. It ships on a 1 x 4 x 60-inch piece of pine.

The bit is intended for wood and mineral-core doors. Use on metal doors is not warranted and is not suggested. This is the authorized drill bit for use in the Marray Perfect Raceway Program by qualified personnel who have taken the class and are listed by Intertek as qualified to modify fire-rated doors in the field for electrified locking hardware.

A quantity discount is offered on two to five bits. Flat $105 USPS shipping covers up to five bits. For six or more bits, contact sales@perfectraceway.com or (775) 241-8730. Inspect the package before signing for it; if it is damaged, refuse the shipment so a claim can be started. Notification of damage is expected within 30 days.

Perfect Raceway Program Tool V2 with laser. A hand lifts the laser bracket; the red laser dot is visible at the top left.
Perfect Raceway Program Tool V2 with laser. The red laser dot is visible at the top left.

SKU: TODO — not listed on the source product page

PRPV2.0 Laser Kit

$99

Laser kit only for the Perfect Raceway Program Tool, Version 2.0. This is the laser, not the tool. The photo shows the laser being removed from a V2 tool, with the red laser dot at the top left.

The kit includes the laser holder, door target, and laser, and comes pre-loaded with two AA batteries.

Buy now

USPS flat-rate shipping to the lower 48 is $20, added at checkout.

A pair of black snap-in replacement drill bushings for the Perfect Raceway Tool V2.

SKU: DCDFGB

Drill Bushings (set of 2, for V2)

$20.75

Replacement bushings for the Perfect Raceway Tool, Version 2.0. Snap out the existing bushings and snap these Delrin, high-speed, high-temperature bushings into the holes. They are made to snap in and stay in place; some effort may be required to insert them correctly. Put them back in the same orientation as the ones you are replacing.

Buy now

USPS flat-rate shipping to the lower 48 is $20, added at checkout.

No product photo available
on the source listing

SKU: DCDF Kit

Dor-Cor Rebuild Kit V1.0

$101

Replacement parts package to update and fine-tune a door drilling tool — either a Perfect Raceway Program tool (with a white Tool ID label) or a standard tool purchased years ago. Perfect Raceway participants are required to replace the bushings when needed in order to comply with the Marray Perfect Raceway Program.

If the fixture is used in the program, it has a tool serial number (TSN). Checkout asks for that 7-digit number, beginning with 100, so records stay current and a new label can be printed with the date of the order. That is a program requirement. If the fixture does not have a TSN, arrangements have to be made to issue one before or with the order.

The kit includes new bushings (authorized for Perfect Raceway audit requirements), pop rivets, new attachment feet pads, brass and poly bushings, and the other parts needed to bring the tool back to almost new. Current kit bushings are made from Prolon. Earlier bushings were Delrin, which the product page describes as less forgiving on mineral-core doors. Any bushing over two years old should be replaced with the new ones if you want to drill mineral-core doors. Certified program participants also receive a Tool ID label showing the date the parts were ordered.

Buy now

USPS flat-rate shipping to the lower 48 is $20, added at checkout. You will be asked for the 7-digit TSN.